The single most common problem with sliding glass doors is that they can stick. It can be caused by a variety of reasons but the easiest solution is the first to try. Check the track for foreign objects. You are looking for anything, first, pebbles, mildew, and leaves, anything that could get in the way of the rollers. Gently and carefully clean out anything you find. You don’t want to dent the track while in the middle of your sliding glass door repairs so be cautious. While you’re doing that also check for any dents that the sliding glass doors could get stuck on. No matter how small the dent may appear, it can still impede the movement of the sliding glass doors. Once you are sure that the track is sound, spread some powdered graphite into the rollers. Rub paraffin wax along the track to make it open more smoothly.

While you are ensuring that your sliding glass doors movement is smooth, you may as well check a few other things. Next in your sliding glass door repair you should check the alignment of the latch. It may not be catching properly and you can realign the mount with the latch if needed. Slide the doors closed and watch the latch to be sure it secures properly. If it doesn’t line up then loosen the screws on the latch and realign it with the mount. Tighten the screws again and check to see that it is your sliding glass doors are secure. Checking the weather stripping can also help any leaks while you’re about your repairs. If there are any leaks some stick-on weather stripping can be applied in just a few minutes.

If you notice the sliding glass doors fog up because of condensation, this can be fixed as well. It is not a good idea to replace just the glass in most cases. The expense would outweigh the benefits. The best idea is to just replace the sliding glass doors completely. In the long run it will save you some money and be easier to deal with.

Finally, with the sliding glass doors repair it is always wise to check the weather stripping. If your sliding glass doors are leaking this is the best fix. Pressure sensitive or stick on weather stripping can be purchased very easily. Apply it around the leaky sliding glass doors and it will be as good as new.